Choosing a tiltrotator
A tiltrotator sits between the excavator's arm and the work tool. It lets the tool rotate 360 degrees and tilt from side to side, so the machine can work a face or a grade without repositioning. Choosing one comes down to three things: the machine's weight, the coupler above and below it, and the options you need.
Start with the machine’s weight
Each tiltrotator is built for a band of machine weights. The bands overlap, so many machines have a choice of two. These are the Steelwrist models we supply:
| Machine weight | Model | Weight from |
|---|---|---|
| Up to 2 t | XTR2 | 80 kg |
| 2–4 t | X04 | 120 kg |
| 5–7 t | X07 | 195 kg |
| 6–10 t | XTR10 | 315 kg |
| 7–12 t | X12 | 330 kg |
| 10–14 t | X14 | 390 kg |
| 12–15 t | XTR15 | 460 kg |
| 12–16 t | X18 | 450 kg |
| 15–20 t | XTR20 | 540 kg |
| 16–22 t | X20 | 540 kg |
| 18–26 t | X26 | 695 kg |
| 19–23 t | XTR23 | 608 kg |
| 25–33 t | X32 | 895 kg |
The tiltrotator’s own weight sits at the end of the arm, and the machine lifts it along with every tool, so check the machine’s lifting capacity with the tiltrotator fitted.
The top: how it fits the machine
The top of the tiltrotator either fits the machine’s own quick coupler, so it comes off like any other tool, or is pinned straight to the dipper arm, which Steelwrist calls Direct Fit. On the X12, for example, the choice is an S45, SQ45, S50 or SQ50 top, or Direct Fit.
The bottom: S or SQ
The tool coupler underneath holds the work tools.
- With an S coupler, the tool is held and locked, but a hydraulic tool’s hoses are connected by hand.
- With SQ, Steelwrist’s automatic connection, the tool’s hydraulics and electrical signals connect as the tiltrotator picks it up, so hydraulic tools change without leaving the cab. All Steelwrist SQ products follow Open-S, the open standard for automatic couplers: see What is Open-S?
On the X12, for example, the tool side takes S45, S50 and SQ50 couplers, and an S-type tiltrotator from S50 upwards can be upgraded to SQ later.
The tool coupler also locks the tool safely. On the X07 to the X32 it has Front Pin Lock (FPL), a mechanical lock of the front shaft that significantly limits the risk of a tool dropping; the X04 has Front Pin Hook (FPH). The XTR range has LockSense, a wireless sensor system for secure tool locking.
X or XTR?
The XTR10, XTR15, XTR20 and XTR23 are Steelwrist’s third-generation tiltrotators, introduced in 2024. They add LockSense tool locking and OptiLube, which lubricates the tiltrotator automatically and tells the operator when the cartridge needs replacing. The XTR2 is Steelwrist’s compact tiltrotator for machines up to 2 tonnes, with a building height of 273 mm.
Fitting and control
The X12 to the X32 come with a control system to suit the excavator, whether it needs a two or four hose solution. We fit, service and repair every tiltrotator we supply.
Tell us the machine, its weight and coupler, and the work it does, and we’ll suggest the tiltrotator and couplers to suit.

