Steelwrist Work Tools

Steelwrist Work Tools

Steelwrist work tools for excavators: hydraulic compactors, and mechanical pallet forks, brushes, grading beams, rippers and asphalt cutters.

Steelwrist makes a set of work tools to go with its tiltrotators and couplers, for excavators from 0 to 33 tonnes. Most are made to work under a tiltrotator, where the tool can be tilted and turned to reach awkward spots, and all of them come on Steelwrist’s S-type brackets.

The hydraulic tools need the excavator’s auxiliary hydraulics. They come on S or SQ brackets, size by size, and the compactors can be upgraded later from S to SQ, Steelwrist’s automatic oil connection; all SQ products follow the Open-S standard. The mechanical tools need no hydraulics. Each tool listed below has its own page with every size and the brackets it comes on; for any other Steelwrist tool, ask us. Steelwrist’s grapples and its tree shear have pages of their own.

  • Steelwrist Rippers

    • Six sizes for excavators up to 33 tonnes, RP30 to RP70
    • Each named after its bracket, S30 to S70
    • Breaks up hard or frozen ground; pulls out rocks, roots and old pipes
    • Replaceable tooth

    0–33 tonnes

  • Steelwrist Fixed Brushes

    • Three widths for excavators from 2 to 20 tonnes: 1,500, 1,800 and 2,400 mm
    • No hydraulics: a simple, robust brush
    • Can be angled under a tiltrotator to reach tight spots
    • For gravel, debris and snow; sweeps near traffic without throwing stones

    2–20 tonnes

  • Hydraulic

    Steelwrist Compactors

    • Six sizes for excavators from 2 to 26 tonnes, HCX6 to HCX26
    • 25 to 70 kN compaction force on a low oil flow, 24 to 55 l/min
    • Made for use under a tiltrotator (with a separate case drain line)
    • Less vibration into the arm and cab
    • S bracket, upgradeable to SQ (from S40); widening kit as an option

    2–26 tonnes

  • Steelwrist Asphalt Cutters

    • Four models for excavators from 2 to 33 tonnes, AC5 to AC20
    • Clean, well-defined cuts in asphalt ahead of cable and pipe work
    • Also makes tidy cuts in turf
    • Popular under a tiltrotator, for precise control
    • S40 to S70 brackets

    2–33 tonnes

  • Steelwrist Grading Beams

    • Four widths for excavators from 2 to 33 tonnes: 1,250 to 2,500 mm
    • Made for use under a tiltrotator
    • Adjustable side plates
    • Extended rear blade carries and spreads material
    • GPS pole mounting points

    2–33 tonnes

  • Steelwrist Pallet Forks

    • Three sizes for excavators from 2 to 33 tonnes: PF2000, PF2500, PF5000
    • Lifting capacity 2, 2.5 and 5 tonnes
    • Adjustable spread; a clear view through to the load
    • Works with or without a tiltrotator
    • S40 to S70 brackets

    2–33 tonnes

Get in touch

Speak to Exc@v8 about the Steelwrist Work Tools.

01539 729999

Cookie settings

Choose which cookies this site may use. You can change this at any time from “Cookie settings” at the bottom of every page.