



Steelwrist TSX6 Tree Shear
4–7 tonnes
Steelwrist's TSX6 tree shear for excavators from 4 to 7 tonnes: a fixed blade and two grapple arms cut and hold trees, branches and brush, so the operator works from the safety of the cab. On an S40 or SQ40 bracket.
- For excavators from 4 to 7 tonnes
- Fixed blade and two grapple arms: cuts and holds the tree
- Knife at the bottom of the shear, to cut close to the stump
- For forestry, and clearing trees from power lines, roadsides, railways and canals
- S40 bracket, upgradeable to SQ40
Technical data
| Work tool type | Hydraulic |
|---|---|
| Machine weight (t) | 4–7 |
| Bracket | S40, SQ40 |
| Max breakout torque (kNm) | 50 |
| Weight from (kg) | 185 |
| Width (mm) | 510 |
| Length (mm) | 670 |
| Height (mm) | 870 |
| Height, max open (mm) | 1140 |
| Gripper reach (mm) | 654 |
| Gripper reach, smallest object (mm) | 67 |
| Cutting capacity, diameter (mm) | Over 180 |
| Oil flow (l/min) | 30 |
Overview
A tree shear on the excavator cuts trees, branches, brush and energy wood far faster than cutting by hand. It is used in forestry and to clear trees from power lines, roadsides, railways and canals, and it is safer, faster and often cheaper than chainsaw work.
The TSX6 has a fixed blade and a powerful cylinder for a strong, safe cut, and two grapple arms shaped to grip round the trunk. High quality steel keeps the arms durable but light, which means less wear on the excavator. The knife sits at the bottom of the shear, so it cuts as close to the stump as possible.
The operator cuts and holds the tree from the cab, so nobody has to work near the cutting zone. The shear is easy to install and maintain, and quick to learn.
It comes with an S-type bracket (S40), and its modular design means it can be upgraded later to SQ (SQ40), Steelwrist’s automatic oil connection; all SQ products follow the Open-S standard.
Steelwrist’s other work tools are on the Work tools page. Tell us the machine and its coupler, and we’ll confirm the fit.