PTH Compactor

PTH Compactor

The PTH Compactor is a mounted plate compactor with three vibrating plates and hydraulic side shift, for firming road and path surfaces and building a crown so water drains off. It works from tractors of about 100 hp, on its own on-board hydraulics, over a 2,550 mm width.

PTH Compactor

Power required
From approx. 100 hp
Working width
2,550 mm
Working depth
Up to 550 mm
Operating weight
Approx. 2,600 kg

Technical data: PTH Compactor

Carrier and mounting
Power required
From approx. 100 hp
Mounting
Three-point frame for tractors
Working
Working width
2,550 mm
Working depth
Up to 550 mm
Plates
3, with 350 mm side shift left and right
Vibration
Vibration system
Adjustable
Frequency
25–60 Hz
Amplitude
2.12 mm
Centrifugal force
3 × 75 kN
Hydraulics and weight
Hydraulics
On board, 95 l built-in tank, oil cooler
Operating weight
Approx. 2,600 kg
Options
Equipment
Special RAL paint finish

PTH Compactor behind a red tractor on a forest road

The last stage in rebuilding a road

Once the crusher has broken the stone and a grader has shaped it, the Compactor firms the material into a load-bearing, passable surface in a single pass.

  • Road and path building
  • Forest and farm roads
  • Compacting slopes

It goes on tractors, Unimogs, wheel loaders, rollers, excavators and other carriers, and suits earthworks companies, road contractors, foresters and farmers. A hand-guided plate suits small areas and backfilling; on longer runs of road, this is wider and can work alongside other jobs.

The PTH Compactor’s three plates on a forest road

Building a crown

The three plates adapt to the profile of the path, and 350 mm of hydraulic side shift to each side moves them where they’re needed. That makes it straightforward to build a crown, so water runs off instead of sitting on the surface.

PTH Compactor on a forest road behind a yellow tractor

How it compacts

The exciter shafts run in set counter-rotation, so the vibration works straight down. That keeps the vibration to the ground around it low while still compacting hard. It means fewer passes, which also helps stop the material separating. It handles a wide variety of soils, and the vibration system is adjustable.

PTH Compactor behind a red tractor on a gravel track

On-board hydraulics

The Compactor carries its own oil supply: a built-in 95 l tank and an oil cooler with a fan and protective cover. Three hydraulic pumps run from the drive shaft, one for each hydraulic motor, and the motors are connected in parallel. Because it supplies its own oil, it works from tractors of about 100 hp.

Grade and compact in one pass

With a Front Grader on the front of the tractor and the Compactor on the rear, the driver shapes and firms the road on the same run.

A special RAL paint finish is available as an option.

Quick answers

Which tractors does it suit? Tractors from about 100 hp, on the three-point frame supplied. Tell us the carrier if it isn’t a tractor.

Can I buy the PTH Compactor in the UK? Yes. Exc@v8 is the sole UK importer of PTH. Use the form below or call us for pricing and availability.

Documents and data sheets

PTH's data sheet covers the information on this product.

Data sheet (PDF)

PTH Compactor: https://excav8.co.uk/pth/compactor

Get in touch

Speak to Exc@v8 about the PTH Compactor.

01539 729999

Cookie settings

Choose which cookies this site may use. You can change this at any time from “Cookie settings” at the bottom of every page.