PTH Stone Crushers
PTH's stone crushers for tractors and carriers, from the compact Micro Crusher and Trail Crusher to the CR200 and CR250, with more models to follow. They break stone in place in the ground, so it stays on site.
Crush it where it lies
The rotor breaks stone in the ground as the carrier drives over it, so there's no hauling or disposal. This isn't a crusher bucket: nothing has to be dug up and fed in.
Read more
The rotor breaks stone in the ground as the carrier drives over it, so there's no hauling or disposal. This isn't a crusher bucket: nothing has to be dug up and fed in.
Sized to the carrier
The Micro Crusher from 30 hp or 70 l/min, the Trail Crusher from 30 hp or 75 l/min. The CR200 for 140–220 hp and the CR250 for 160–300 hp.
Read more
The Micro Crusher from 30 hp or 70 l/min, the Trail Crusher from 30 hp or 75 l/min. The CR200 for 140–220 hp and the CR250 for 160–300 hp.
Made for hard rock
Carbide-tipped tools and replaceable Hardox armour throughout. The CR200 and CR250 take rock up to 150 N/mm².
Read more
Carbide-tipped tools and replaceable Hardox armour throughout. The CR200 and CR250 take rock up to 150 N/mm².

PTH Micro Crusher
- Stone crusher, forestry mill and mulcher in one attachment
- Works up to 150 mm deep, even in stone
- Working widths of 900, 1,150 and 1,400 mm
- PTO drive from 30 hp, or hydraulic drive from 70 l/min at 220 bar
- Carbide-tipped fixed tools, in forestry, stone or universal versions

PTH Trail Crusher
- Crushes stone, mills and mulches in one pass
- Working widths of 900, 1,150 and 1,400 mm; depth up to 150 mm
- Hydraulic drive (from 75 l/min at 300 bar) or PTO drive (540 rpm, from 30 hp)
- Carbide-tipped fixed tools for stone, wood and earth; Hardox armour
- Fits implement carriers and small tractors, including the Pfanzelt Moritz

PTH Crusher CR200
- For tractors of 140 to 220 hp, on Category 3 three-point mounting
- 2,000 mm working width, up to 250 mm deep
- Rock up to 150 N/mm²; pieces up to 500 mm crushed as fine as 20 mm, depending on equipment
- Theoretical throughput of up to 450 m³/h
- Wear parts bolted on, so they can be changed on site

PTH Crusher CR250
- For tractors of 160 to 300 hp, on Category 3 three-point mounting
- 2,500 mm working width, up to 250 mm deep
- Rock up to 150 N/mm²; pieces up to 500 mm crushed as fine as 20 mm, depending on equipment
- Theoretical throughput of up to 600 m³/h
- Wear parts bolted on, so they can be changed on site
Compare the models
Where a product comes in several sizes, its column shows the spread. Each product's page has the full figures.
Key figures
| Specification | Micro Crusher | Trail Crusher | CR200 | CR250 |
|---|---|---|---|---|
| Power required | 30–75 hp or from 70 l/min | 30–75 hp or from 75 l/min | 140–220 hp | 160–300 hp |
| Working width | 900–1,400 mm | 900–1,400 mm | 2,000 mm | 2,500 mm |
| Working depth | Up to 150 mm | Up to 150 mm | Max. 250 mm | Max. 250 mm |
| Weight | Approx. 350–590 kg | Approx. 500–750 kg | Approx. 3,800 kg | Approx. 4,800 kg |
Crushing
| Specification | Micro Crusher | Trail Crusher | CR200 | CR250 |
|---|---|---|---|---|
| Tools | 32–48 | 32–48 | 24 | 32 |
| Crushing stage | Hardox, mechanically adjustable | Hardox, mechanically adjustable | Hydraulically adjustable, 10–70 mm | Hydraulically adjustable, 10–70 mm |
| Inner armour | 10 mm Hardox, replaceable | 10 mm Hardox, replaceable | 15 mm Hardox, replaceable | 15 mm Hardox, replaceable |
| Throughput (theoretical) | –Not listed | –Not listed | Up to 450 m³/h | Up to 600 m³/h |
Drive and mounting
| Specification | Micro Crusher | Trail Crusher | CR200 | CR250 |
|---|---|---|---|---|
| Drive | Hydraulic or PTO | Hydraulic or PTO | Both sides, 5 high-performance V-belts each | Both sides, 5 high-performance V-belts each |
| PTO speed | 540 rpm | 540 rpm | 540, 750 or 1,000 rpm | 540, 750 or 1,000 rpm |
| Mounting | Three-point, Category 1 or 2 (PTO) | Three-point, Category 1 (PTO) | Three-point, Category 3 | Three-point, Category 3 |
Dimensions
| Specification | Micro Crusher | Trail Crusher | CR200 | CR250 |
|---|---|---|---|---|
| Rotor width | –Not listed | –Not listed | 1,500 mm | 2,000 mm |
| Total width | 1,250–1,680 mm | 1,250–1,680 mm | 2,100 mm | 2,600 mm |
