HSM 208F 11 t Kombi
The 208F 11 t as a combination machine, in a short or long version: 11 t payload, a 185 kW (252 HP) Volvo Penta engine, a 2 × 100 kN double-drum winch and an Epsilon crane.
Forwarding and rope forwarding
A forwarder with a double-drum winch for rope forwarding as well, from 9 t to 14 t payload.
Read more
A forwarder with a double-drum winch for rope forwarding as well, from 9 t to 14 t payload.
Short or long
Every size comes in a short and a long version.
Read more
Every size comes in a short and a long version.
Epsilon crane, load-sensing hydraulics
An Epsilon M70 F80 crane as standard, on load-sensing hydraulics delivering 304 l/min at up to 350 bar.
Read more
An Epsilon M70 F80 crane as standard, on load-sensing hydraulics delivering 304 l/min at up to 350 bar.
Speak to us about the208F 11 t Kombi
EnquireHSM 208F 11 t Kombi
- Payload
- 11 t
- Power
- 185 kW (252 HP)
- Weight
- From 19,600 kg
- Crane
- Epsilon M70 F80
Technical data: HSM 208F 11 t Kombi
Engine
- Model
- Volvo Penta TAD881VE, 6-cylinder, EU Stage V
- Power
- 185 kW (252 HP) from 1,600 rpm
- Torque range
- 1,150 Nm from 1,100–1,500 rpm
- Maximum torque
- 1,175 Nm at 1,400 rpm
- Displacement
- 7.7 litres
Engine (optional)
- Model
- Volvo Penta TAD882VE, 6-cylinder, EU Stage V
- Power
- 210 kW (286 HP) from 1,700 rpm
- Torque range
- 1,225 Nm from 1,100–1,600 rpm
- Maximum torque
- 1,255 Nm at 1,400 rpm
- Displacement
- 7.7 litres
Drive
- Transmission
- NAF 2 speed transfer gearbox
- HSM High Speed Drive (series 71); speed at 1st gear 0–14 km/h
- Brakes
- 2-circuit brake, oil-cooled multiple-disc brake
- Spring accumulator – parking brake
- Steering
- Articulated frame steering with 2 cylinders
- Steering angle 45°
Tanks
- Diesel
- 190 l
- AdBlue
- 45 l
- Hydraulic oil
- 130 l
Hydraulics
- System
- Load sensing
- Variable pump (working pump)
- Flow
- 304 l/min from 1,600 rpm
- Pressure
- Up to 350 bar
- Oil
- Saturated synthetic ester
- Panolin HLP SYNTH with Kleenoil
- Microfiltration; WGK 1
Winches
- Standard
- Adler HY 20 (2 × 100 kN) double-drum winch; cable take-up 14 mm, 100 m
- Optional
- Adler HY 24-SG (2 × 120 kN) double-drum winch; cable take-up 14 mm, 130 m
- Adler HY 32 L-SG (2 × 160 kN) double-drum winch; cable take-up 14 mm, 170 m
Crane
- Standard
- Epsilon M70 F80
- Low crane column
- Standard: low crane column, 1,730 mm
Load
- Payload
- 11 t
Weight
- Operating weight
- from 19,600 kg / 19,800 kg (short / long)
Tyres
- Standard
- 710/45 × 26.5: 2,600 mm minimum width
- Note
- By using tracks the min. width will change (+100 mm). Other tyres on request.
Cab
- Features
- Raisable to side on parallel linkages
- ROPS, FOPS, OPS tested
- Rotary seat with pedals in front and rear
- Wiper in front and rear, optional on the side
- Air cushioned seat with seat heating
- Hot-water heating
- Air conditioning
Electrics
- Equipment
- HSM Ecommand colour-display
- 5 operator programs + factory setting
- Diagnosis-tool and error-indication
- Graphic support at parameter editing
- Generator 110 A (28 V)
- 2 maintenance-free dry-cell batteries, 75 Ah each
Equipment
- Standard
- 14 LED-working headlight at cabin
- 4 working headlights at crane
- Potential transformer 24 V - 12 V
- Radio with CD
- Fire extinguisher
- First aid kit
- Warning triangle
- Tool kit
- Cooling box
- Reversing camera with colour monitor
- Rear headlights
- Twist lock with 2 hydraulic cylinders
- Grid and first rung demountable
- Last rung demountable and displaceable to loading length: (short) 2.4 m, 3.2 m and 3.65 m (long) 2.8 m, 3.6 m and 4.05 m
- Roller-block
- High adjustable
- Cross section 3.3 m²
- Special
- Front dozer-blade
- Tandem axle lift (Bogie lift) front
- Turnable rung
- Last rung plugged
- Tiltable crane
- Quick-change system for rungs
- Clambunk
- Auxiliary heating
- Bogie-tracks
- Radio control for winch
- Drive by radio
- Sun blinds
- Pluggable front grid
- Cab suspension HCS
- Crane tip control xyControl (Epsilon crane only)
- Fear blade
- Clambunk with quick-change system
- Twin-rung as 2nd and 3rd rung on quick-change system
- Tandem axle lift (Bogie lift) rear
Crane options
The 208F 11 t Kombi comes with the Epsilon M70 F80 as its standard crane and can be fitted with 38 other Epsilon and Mesera cranes as options. Lifting moments are gross / net.
Epsilon cranes (18)
| Crane | Lifting moment | Reach | Fit |
|---|---|---|---|
| Epsilon M70 F80 | 102 / 68 kNm | 8.0 m | Standard |
| Epsilon M70 F86 | 102 / 68 kNm | 8.6 m | Optional |
| Epsilon M70 F101 | 102 / 65 kNm | 10.1 m | Optional |
| Epsilon M80 F80 | 114 / 79 kNm | 8.0 m | Optional |
| Epsilon M80 F86 | 114 / 79 kNm | 8.6 m | Optional |
| Epsilon M80 F101 | 114 / 75 kNm | 10.1 m | Optional |
| Epsilon S100 F80 | 128 / 91 kNm | 8.0 m | Optional |
| Epsilon S100 F86 | 128 / 90 kNm | 8.6 m | Optional |
| Epsilon S100 F101 | 128 / 86 kNm | 10.1 m | Optional |
| Epsilon S110 F80 | 143 / 104 kNm | 8.0 m | Optional |
| Epsilon S110 F86 | 143 / 104 kNm | 8.6 m | Optional |
| Epsilon S110 F101 | 143 / 100 kNm | 10.1 m | Optional |
| Epsilon X120 F80 | 159 / 111 kNm | 8.0 m | Optional |
| Epsilon X120 F86 | 159 / 110 kNm | 8.6 m | Optional |
| Epsilon X120 F102 | 159 / 107 kNm | 10.2 m | Optional |
| Epsilon X140 F80 | 173 / 123 kNm | 8.0 m | Optional |
| Epsilon X140 F86 | 173 / 122 kNm | 8.6 m | Optional |
| Epsilon X140 F102 | 173 / 119 kNm | 10.2 m | Optional |
Mesera cranes (21)
| Crane | Lifting moment | Reach | Fit |
|---|---|---|---|
| Mesera F71 F72 | 99 / 75 kNm | 7.2 m | Optional |
| Mesera F71 FT85 | 99 / 70 kNm | 8.5 m | Optional |
| Mesera F71 FT100 | 99 / 66 kNm | 10.0 m | Optional |
| Mesera F71 FT100i | 99 / 66 kNm | 10.0 m | Optional |
| Mesera F83 F72 | 106 / 82 kNm | 7.2 m | Optional |
| Mesera F83 FT85 | 106 / 76 kNm | 8.5 m | Optional |
| Mesera F83 FT100i | 106 / 73 kNm | 10.0 m | Optional |
| Mesera M 92 F80i | 130 / 84 kNm | 8.0 m | Optional |
| Mesera M 92 FT86i | 130 / 84 kNm | 8.6 m | Optional |
| Mesera M 92 FT100i | 130 / 84 kNm | 10.0 m | Optional |
| Mesera F111 F72 | 151 / 111 kNm | 7.2 m | Optional |
| Mesera F111 F85 | 151 / 100 kNm | 8.5 m | Optional |
| Mesera F111 FT85 | 151 / 100 kNm | 8.5 m | Optional |
| Mesera F111 FT91 | 151 / 98 kNm | 9.1 m | Optional |
| Mesera F111 FT100 | 151 / 101 kNm | 10.0 m | Optional |
| Mesera M122 F85i | 155 / 110 kNm | 8.5 m | Optional |
| Mesera M122 F96i | 155 / – kNm | 9.6 m | Optional |
| Mesera M122 FT100i | 155 / – kNm | 10.0 m | Optional |
| Mesera M142 F85i | 178 / 132 kNm | 8.5 m | Optional |
| Mesera M142 F96i | 178 / 124 kNm | 9.6 m | Optional |
| Mesera M142 FT100i | 178 / – kNm | 10.0 m | Optional |
The variable rear
- The last stanchion can be set in a short, centre or long position.
- A quick-change twin stanchion takes 2 × 2 m or 2 × 2.5 m wood.
- Pulleys are height-adjustable, up to 2 m.
- Rope forwarding is possible without reconfiguring the stanchion or the clamping workbench.
- Logs can be forwarded with a quick-change clamping workbench.
Variable rear diagrams (8)
Documents and data sheets
HSM's data sheet for the 208F 11 t Kombi: data sheet (PDF)
HSM 208F 11 t Kombi: https://excav8.co.uk/hsm/combination-forwarders/208f-11t-kombi
Gallery
