PTH Micro Crusher

The PTH Micro Crusher is a compact stone crusher, forestry mill and mulcher for small tractors, skid steer loaders and implement carriers. It works up to 150 mm deep, even in stone, with a PTO drive from 30 hp or a hydraulic drive from 70 l/min.

  • Stone crusher, forestry mill and mulcher in one attachment
  • Works up to 150 mm deep, even in stone
  • Working widths of 900, 1,150 and 1,400 mm
  • PTO drive from 30 hp, or hydraulic drive from 70 l/min at 220 bar
  • Carbide-tipped fixed tools, in forestry, stone or universal versions

Overview

The PTH Micro Crusher brings the technology of PTH’s large stone crushers down to small tractors and implement carriers. It crushes and mills stone, mulches scrub, takes out roots and stumps and mixes the material back into the ground, all with one attachment.

What it’s used for

  • Stone milling and crushing on paths and green areas.
  • Mulching and forestry mulching.
  • Deep milling of surfaces.
  • Removing rootstocks and tree stumps.
  • Milling road shoulders and verges.
  • Work in orchards and vineyards.

It suits landscape contractors, road builders, councils, nurseries, farmers, and vineyards and fruit growers.

PTO or hydraulic

The PTO version runs from a tractor’s power take-off at 540 rpm, on small tractors and implement carriers from 30 hp. It has three high-performance V-belts on each side, and three-point mounting: Category 1 on the 900 and 1150, Categories 1 and 2 on the 1400.

The hydraulic version runs from the carrier’s hydraulics, from 70 l/min at 220 bar, so it goes on skid steer loaders, wheel loaders, tracked carriers and other implement carriers. It has six high-performance V-belts on one side and comes in the two wider sizes.

Construction

Its construction comes from PTH’s large stone crushers rather than from forestry mulchers, so it’s built for harder work. The rotor carries carbide-tipped fixed tools in an overlapping arrangement, inside replaceable 10 mm Hardox armour. A mechanically adjustable Hardox crushing stage sets how fine the result is, and the tailgate is hydraulic.

Other versions

PTH builds the same technology into the Trail Crusher, for building and renovating trails, and the Excavator Crushers, for excavators. The PTO version also runs on the remote-controlled Pfanzelt Moritz.

Options

PTO version

  • Forest frame
  • Extra skids
  • Front-mounted frame
  • Three-point extension
  • Hydraulic side shift
  • A 1,000 rpm PTO shaft
  • A special RAL paint finish

Hydraulic version

  • Forest frame
  • Extra skids
  • Mounting for an implement carrier
  • A special RAL paint finish

Choosing a size

The PTO version comes in working widths of 900, 1,150 and 1,400 mm, the hydraulic version in 1,150 and 1,400 mm. All of them work to a maximum depth of 150 mm, and the table below gives each version’s tools, power needed and weight.

Sizes in this range

DesignationDriveWorking width (mm)Total width (mm)ToolsPower requiredWeight (kg)
Hydraulic 1150Hydraulic1,1501,37040Min. 70 l/min at 220–360 barApprox. 500
Hydraulic 1400Hydraulic1,4001,59948Min. 85 l/min at 220–360 barApprox. 570
PTO 900PTO, 540 rpm9001,2503230–75 hpApprox. 350
PTO 1150PTO, 540 rpm1,1501,4404035–75 hpApprox. 400
PTO 1400PTO, 540 rpm1,4001,6804845–75 hpApprox. 590

Quick answers

Which carriers does it suit? With the PTO drive, tractors and implement carriers from 30 hp. With the hydraulic drive, any suitable carrier that delivers at least 70 l/min at 220 bar for the 1150, or 85 l/min for the 1400.

Where are the data sheets? PTH publishes one for each drive: the PTO data sheet and the hydraulic data sheet.

Can I buy the PTH Micro Crusher in the UK? Yes. Exc@v8 is the sole UK importer of PTH. Use the form below or call us for pricing and availability.

Get in touch

Speak to Exc@v8 about the PTH Micro Crusher.

01539 729999

Cookie settings

Choose which cookies this site may use. You can change this at any time from “Cookie settings” at the bottom of every page.