



Steelwrist Compactors
2–26 tonnes
Steelwrist's HCX hydraulic plate compactor for excavators from 2 to 26 tonnes: a high compaction force on a low oil flow, so it runs under a tiltrotator. Six sizes, HCX6 to HCX26, from 25 to 70 kN.
- Six sizes for excavators from 2 to 26 tonnes, HCX6 to HCX26
- 25 to 70 kN compaction force on a low oil flow, 24 to 55 l/min
- Made for use under a tiltrotator (with a separate case drain line)
- Less vibration into the arm and cab
- S bracket, upgradeable to SQ (from S40); widening kit as an option
Overview
Steelwrist’s HCX compactors give the excavator a high compaction force for soil and trench work, and their efficient design keeps fuel use down. The operator can switch between digging and compacting with the same machine.
They run smoothly on a low oil flow, which is why they suit use under a tiltrotator. Typical jobs are road building, foundations, backfilling trenches and landfill compaction. They are easy to position precisely, and less vibration and noise reach the arm and the cab.
Each compactor comes with an S-type bracket. Its modular design means it can be upgraded later (from S40) to SQ, Steelwrist’s automatic oil connection, which picks up and connects a hydraulic tool from the cab; all SQ products follow the Open-S standard. A widening kit (2 × 75 mm) is available as an option and can be fitted later.
Under a tiltrotator, the compactor needs a separate case drain line.
Six sizes, HCX6 to HCX26, cover excavators from 2 to 26 tonnes, with 25, 50 or 70 kN of compaction force. The table lists each one, with the brackets it comes with.
Sizes in this range
| Designation | Machine weight (t) | Bracket | Weight from (kg) | Width (mm) | Length (mm) | Height (mm) | Compaction force (kN) | Vibration frequency (Hz) | Oil flow (l/min) | Max pressure (bar) |
|---|---|---|---|---|---|---|---|---|---|---|
| HCX6 | 2–6 | S40, SQ40 | 190 | 470 | 809 | 603 | 25 | 44 | 24 | 210 |
| HCX8 | 2–8 | S45, SQ45, S50, SQ50 | 210 | 470 | 820 | 620 | 25 | 44 | 24 | 210 |
| HCX12 | 8–12 | S45, SQ45, S50, SQ50 | 390 | 630 | 1003 | 705 | 50 | 40 | 38 | 210 |
| HCX14 | 12–14 | S60, SQ60 | 420 | 630 | 1030 | 730 | 50 | 40 | 38 | 210 |
| HCX20 | 14–20 | S60, SQ60 | 520 | 760 | 1030 | 760 | 70 | 40 | 55 | 210 |
| HCX26 | 20–26 | S70, SQ70 | 590 | 760 | 1107 | 760 | 70 | 40 | 55 | 210 |
Every Steelwrist work tool is on the Work tools page. Not sure which size you need? Tell us the machine, its coupler and the job, and we’ll match it.