


Steelwrist Fixed Brushes
2–20 tonnes
Steelwrist's fixed (non-rotating) brush for excavators from 2 to 20 tonnes: sweeps gravel, debris and snow, and can be angled under a tiltrotator. Three widths, 1,500 to 2,400 mm.
- Three widths for excavators from 2 to 20 tonnes: 1,500, 1,800 and 2,400 mm
- No hydraulics: a simple, robust brush
- Can be angled under a tiltrotator to reach tight spots
- For gravel, debris and snow; sweeps near traffic without throwing stones
Overview
The fixed brush is a simple, robust brush for the excavator, with no hydraulics to connect. Under a tiltrotator it can be angled to reach tight spots.
Use it to sweep gravel, clear snow from bus stops and farm buildings, and clean debris and spoil off a site. It can sweep near traffic without the risk of stone chips.
Three widths, FB1500, FB1800 and FB2400, cover excavators from 2 to 20 tonnes. The table lists the brackets each comes on.
Sizes in this range
| Designation | Machine weight (t) | Bracket | Weight from (kg) | Width (mm) | Length (mm) | Height (mm) |
|---|---|---|---|---|---|---|
| FB1500 | 2–20 | S40, S45, S50, S60, S65 | 155 | 1500 | 790 | 290 |
| FB1800 | 2–20 | S40, S45, S50, S60, S65 | 180 | 1800 | 790 | 290 |
| FB2400 | 2–20 | S45, S50, S60, S65, S70, S70/55 | 230 | 2400 | 790 | 290 |
For a powered, rotating brush, Steelwrist also makes sweepers: ask us about them. Every Steelwrist work tool is on the Work tools page. Not sure which size you need? Tell us the machine, its coupler and the job, and we’ll match it.