


Steelwrist V-Ditch Buckets
0–22 tonnes
Steelwrist's V-ditch bucket, also called a profile bucket, for excavators from 0 to 22 tonnes: a V-shaped bucket for drainage work, ditches, channels and embankments. 7 models, VB2 to VB20, 900 to 2,000 mm wide at the top, on S-type brackets from S30 to S70.
- 8 sizes for excavators from 0 to 22 tonnes, VB2 to VB20
- From 900 mm wide at the top (200 mm at the bottom) to 2,000 mm (350 mm)
- A V-shaped profile for ditches, channels and embankments
- Keeps the ditch to a straight line and a consistent profile
- Works on a tiltrotator; every wear plate in high grade steel
Overview
The V-ditch bucket, also called a profile bucket, was developed for drainage work: anywhere a set angle or a V-shaped profile is needed, such as ditches, channels and embankments. It gets the job finished faster, keeps the ditch to a straight line and gives a consistent, accurate profile along its length. It can be used on a tiltrotator.
Every wear plate is high grade steel, which makes the bucket durable and light.
7 models, VB2 to VB20, cover excavators from 0 to 22 tonnes in 8 sizes. The table lists every one, grouped by the bracket on the bucket, with Steelwrist’s part numbers.
Sizes in this range
| Designation | Machine weight (t) | Bracket | Width (mm) | Volume (l) | Weight (kg) | Part No |
|---|---|---|---|---|---|---|
| S30 bracket | ||||||
| VB2 | 0–2 | S30 | 900/200 | 90 | 65 | 898411 |
| S40 bracket | ||||||
| VB3 | 2–6 | S40 | 1100/200 | 140 | 120 | 898412 |
| VB4 | 2–6 | S40 | 1200/200 | 200 | 195 | 898413 |
| VB6 | 2–6 | S40 | 1400/300 | 240 | 210 | 898414 |
| S45 bracket | ||||||
| VB8 | 5–12 | S45 | 1700/300 | 400 | 290 | 898415 |
| S50 bracket | ||||||
| VB8 | 5–12 | S50 | 1700/300 | 400 | 290 | 898416 |
| S60 bracket | ||||||
| VB15 | 12–16 | S60 | 1750/300 | 500 | 390 | 898417 |
| S70 bracket | ||||||
| VB20 | 16–22 | S70 | 2000/350 | 600 | 570 | 898418 |
Each width is given as Steelwrist gives it, at the top and at the bottom of the V (for example 900/200). Steelwrist gives one volume for these buckets without saying whether it is ISO or SAE; the bucket finder on our buckets page shows it as given. The buckets fit Steelwrist’s S quick couplers and tiltrotators of the same bracket size. Not sure which size you need? Tell us the machine, its coupler and the job, and we’ll match it.