Steelwrist Skeleton Buckets

0–20 tonnes

Steelwrist's skeleton bucket, also called a riddle or sieve bucket, for excavators from 0 to 20 tonnes: a general-purpose bucket with vertical bars for sifting and sorting. 5 models, SKB2 to SKB14, 500 to 1,300 mm wide, 41 or 63 mm sorting gap, on S-type brackets from S30 to S60.

  • 6 sizes for excavators from 0 to 20 tonnes, SKB2 to SKB14
  • Widths from 500 to 1,300 mm
  • Sorting gap of 41 or 63 mm
  • Vertical, curved bars: fine material sifts through, larger pieces stay, and water drains away
  • Also called a riddle or sieve bucket

Overview

The skeleton bucket goes by several names: sieve, sorting or riddle bucket. Its vertical, open bars let fine material such as sand, loose soil and small stones sift through while the larger pieces and debris stay in the bucket. It is a handy general-purpose bucket in construction, landscaping, recycling and agriculture, and on urban sites it is used for breaking up asphalt and for picking up and sorting stone paving. The open structure also lets water drain away.

The design keeps the bucket’s weight down, so the excavator can lift more material, and its shape makes it easier to get underneath what is being sorted. The long, curved vertical bars keep resistance low when digging and sorting. Every wear plate is high grade steel.

5 models, SKB2 to SKB14, cover excavators from 0 to 20 tonnes in 6 sizes, with a 41 or 63 mm sorting gap. The table lists every one, grouped by the bracket on the bucket, with Steelwrist’s part numbers.

Sizes in this range

6 sizes

DesignationMachine weight (t)BracketWidth (mm)Volume (l)Weight (kg)Sorting gap (mm)Part No
S30 bracket
SKB20–2S30500605041101201
S40 bracket
SKB43–5S406001308541101202
S45 bracket
SKB85–12S45100037030063101212
S50 bracket
SKB65–8S5080016017063101203
SKB85–12S50100037030063215876
S60 bracket
SKB1412–20S60130062053063215874

Skeleton or sorting? The skeleton bucket has vertical bars; the sorting bucket has a grid across the bucket instead, and comes in sizes up to 32-tonne machines. The sorting gap is the space between the bars. Steelwrist gives one volume for these buckets without saying whether it is ISO or SAE; the bucket finder on our buckets page shows it as given. The buckets fit Steelwrist’s S quick couplers and tiltrotators of the same bracket size. Not sure which size you need? Tell us the machine, its coupler and the job, and we’ll match it.

Get in touch

Speak to Exc@v8 about the Steelwrist Skeleton Buckets.

01539 729999

Cookie settings

Choose which cookies this site may use. You can change this at any time from “Cookie settings” at the bottom of every page.