PTH Excavator Crusher EC-M 1150
5–14 tonnes
The PTH Excavator Crusher EC-M 1150 combines a stone crusher, stone cutter and forestry mulcher in one attachment for 5 to 14 tonne excavators, working in stone, mixed ground, wood and earth on slopes, small areas and construction sites.
- Stone crusher, stone cutter and forestry mulcher in one attachment
- For 5–14 t excavators, from 70 l/min at 250–360 bar
- 1,100 mm working width, 1,355 mm total width, working depth up to 80 mm
- Carbide-tipped tools on an overlapping rotor, with a mechanically adjustable HARDOX crushing stage
- Hydraulically adjustable discharge flap
Technical data
| Excavator class | 5–14 t |
|---|---|
| Tools | 40 |
| Oil flow | From 70 l/min |
| Pressure | 250–360 bar |
| Drive | Single-sided, 6 high-performance V-belts |
| Dead weight | Approx. 600 kg |
| Working width | 1,100 mm |
| Total width | 1,355 mm |
| Working depth | Max. 80 mm |
| Crushing stage | HARDOX, mechanically adjustable |
Overview
The PTH Excavator Crusher EC-M 1150 is a stone crusher, stone cutter and forestry mulcher in one attachment for excavators of 5 to 14 tonnes. It was developed with contractors, and it works in hard ground such as stone, where forestry mulchers reach their limits, as well as in mixed soils, wood and earth.
The smaller size
The EC-M is the smaller of PTH’s two excavator crusher sizes. It works in the forest, on embankments and on small areas, and has a hydraulically adjustable discharge flap. For larger excavators, from 10 to 25 tonnes, see the EC-L 1150 and the EC-L 1400.
Construction
The EC-M 1150 carries carbide-tipped stationary tools on a rotor with an overlapping tool arrangement, inside replaceable 10 mm HARDOX armour, with a mechanically adjustable HARDOX crushing stage. The tool holders wear little, and the machine can be set up as a forestry mulcher, a stone crusher or a universal version. A single-sided drive with six high-performance V-belts turns the rotor.
Where it is used
- Slope and embankment maintenance, and bank rehabilitation.
- Verge maintenance.
- Road construction and land reclamation.
- Construction site preparation, and small areas.
- Forestry.
Fitting it to the excavator
An adapter plate fits it to the excavator’s quick coupler, or to a wheel loader. The EC-M 1150 needs at least 70 l/min of oil at 250 to 360 bar, which has to match the excavator’s hydraulics, so check both before you order: call us or use the form below.
Options
- Adapter plate for an excavator or wheel loader
- Raised sliding shoe
- Hydraulic control block with two functions
- Rotary rotator
- Shift valve for the flap and the rotary rotator
- Bluetooth control for the changeover valve
- A special RAL paint finish
- Capable of PTH Tronic MIC 4.0
Quick answers
Which excavators does it suit? Excavators of 5 to 14 tonnes. Call us with the make and model of your excavator to check it suits.
How fine does it crush? Typically about 20 to 40 mm, depending on the ground, the tools and the machine.
Can I buy the PTH Excavator Crusher EC-M 1150 in the UK? Yes. Exc@v8 supplies PTH’s range in the UK. Use the form below or call us for pricing and availability.